Handmade origami stacking roses mart origami stacking roses. The origami life is many of us very much. Many people are also very interested in origami. There are many ways to fold all kinds of items. So, how to make handmade origami stack roses? Let's learn together. mart origami stacking roses 1 Step 1, first prepare four small squares (7, 5cmx7, 5cm) and a rectangular paper (7, 5cmx15cm).
Step 2, first fold the rose flower branches, take out the rectangular paper, and roll a corner into the columnar.
It Step 3, roll up the rolled cylindrical shape to this position (do not leave the gap in the middle when rolling), apply this corner to glue.
Step 4, roll the corners of the glue into the cylindrical body and stick tightly. In this way, the flower branches are folded.
Step 5, take out a piece of square paper, fold the upper and lower sides.
Step 6, then fold the left and right sides together and align.
Step 7, fold the lower right corner to the diagonal line to the upper left corner, align.
Step 8, pinch the upper right corner (unbridled), and cut it from this position with scissors.
Step 9, cut the upper part into an arc, as shown in the figure.
It step 10, and then cut the top angle of the bottom.
Step 11, this is the graphic after the expansion.
It Step 12, the other three will be operated in the same method, and a total of four such patches are obtained.
Step 13, subtract the four flower types separately, 1, 2, 3, and 4 petals, as shown in the figure.
Step 14, discard 2 petals and 4 petals cut on the right side.
Step 15. Re -adjust the lower position, respectively 1, 3, 4, 5, 6, and 7 petals, respectively.
Step 16, apply the separated two petals with glue to re -stick them together.
Step 17. This is a new shape that is re -sticking.
Step 18, then roll all the petals outward, as shown in the figure.
The step 19, apply 1 petal to the top of the flower branch to adjust the shape.
It Step 20, apply glue below the 1 petals on the flower branch, and put the two petals from the other end of the flower branch along the hole of the center. Stick up.
Step 21, then wear 3, 4, 5, and 6 petals to the top of the flower branch, stick well, and adjust slightly. In this way, the beautiful roses are folded, very beautiful, interested friends hurry up and try. mart origami stacking roses 2 1. It is consistent with the folding method of all origami roses. Choose your favorite direction paper, and the color is also determined at the same time. However, since it is made of origami roses, it will be the best choice of red paper. First, the paper is folded horizontally and vertically. After the unfolding, two clatons that are criss -horizontal will be kept in the middle of the paper. Next, a back -ups are arbitrarily folded at will, so that the rectangular structure is obtained.
2. Then, on the basis of this rectangular structure, turn the edge of the square paper midline upwards. It needs to be adjusted. Then expand the origami model so that you can see another two creases again. Then rotate the paper 90 degrees, and then fold in the same way. After the expansion, two creases will also be left in the middle of the paper. In this way, the new four -two -two -two -two -two -two -two -two -two -two -two -.
3. The origami model at this time is folded twice in a consecutive way according to the horizontal and vertical folding method, and folded into a small square. That is the style as shown in the figure. Then turn the corner where the center point of the paper is turned upwards, and the folding point is at the intersection of the two nearest creases. The specific point and folding method can refer to the style shown in the origami icon to perform folding operations. After the folding is completed, the origami model is expanded, and you can see that the center of the paper is retained with a small square left after the folding.
4. In this step, it is mainly made of pre -campaign (the production of other origami roses is similar here, such as origami rose tutorial: simple handmade origami rose `folding method). That is, according to the method shown in the origami icon, the position of the yellow line is folded out of the pre -campaign. The remaining three positions in this one also folded out the pre -creases in the same way. After completing this fold, you can rotate the paper.
5. After the above steps are completed, we get the origami rose crease style as shown in the figure. Because of the assistance of pre -creases, the Kawasaki rose -type rotation aggregation can be carried out next. Themugpant origami stack rose 3 1. Select a square paper, the color is naturally red. Here, the square paper is folded first, and the left corner and right corner of the right corner are shown as shown in the figure.
2. Then fold the top side to the diagonal crease, and the bottom edge is also folded at the diagonal crease, which is inclined to the top and the left top angle obliquely Turn down and fold the bottom edge and the right bottom to the diagonal above. After completing the folding, the origami model is flattened.
3. In fact, the folding production above has left us three creases, and more creases need to be made next. And folded as shown in the figure. The folding here is the same as the creases of Shinagawazaki roses. After using 7 creases, the origami model was directly divided into eight points. The above four were valley marks, the following three were valley marks, and the middle ones were peak marks. Just fold it out according to the drawing icon.
4. Put the previous folding paper, and then rotate the paper, that is, the same pair of diagonal and one pair is also folded in the same way as the first step to the third step. After the paper is launched, you will see the creases shown in the figure. These creases will finally assist us to complete the production of origami roses.
a 5. Pay attention to the red lines in the origami icon. These red lines are peak marks that we should fold out at this step, and these folds are all local folds, so Just be a little serious when you fold it.
6. Follow the four corners according to the blue lines in the origami icon at this time. Note that when the blue lines are located when folding, the position of the blue line is not completely fits all else, but at least it is at least a small square structure composed of a crease. This point must be Pay attention.
7. The red and blue lines here are to explain that the next folding is twisting and folding. On the lines, and a small square structure is formed in the middle.
8. After folding in front, we got the origami icons as shown in the figure. It can be seen that at this time, there are already some folding roses to appear, especially if you know a little about the folding of Kawasaki roses, you must not be unfamiliar with the appearance of such a structure.
Handmade origami stacking roses
mart origami stacking roses. The origami life is many of us very much. Many people are also very interested in origami. There are many ways to fold all kinds of items. So, how to make handmade origami stack roses? Let's learn together.
mart origami stacking roses 1 Step 1, first prepare four small squares (7, 5cmx7, 5cm) and a rectangular paper (7, 5cmx15cm).
Step 2, first fold the rose flower branches, take out the rectangular paper, and roll a corner into the columnar.
It Step 3, roll up the rolled cylindrical shape to this position (do not leave the gap in the middle when rolling), apply this corner to glue.
Step 4, roll the corners of the glue into the cylindrical body and stick tightly. In this way, the flower branches are folded.
Step 5, take out a piece of square paper, fold the upper and lower sides.
Step 6, then fold the left and right sides together and align.
Step 7, fold the lower right corner to the diagonal line to the upper left corner, align.
Step 8, pinch the upper right corner (unbridled), and cut it from this position with scissors.
Step 9, cut the upper part into an arc, as shown in the figure.
It step 10, and then cut the top angle of the bottom.
Step 11, this is the graphic after the expansion.
It Step 12, the other three will be operated in the same method, and a total of four such patches are obtained.
Step 13, subtract the four flower types separately, 1, 2, 3, and 4 petals, as shown in the figure.
Step 14, discard 2 petals and 4 petals cut on the right side.
Step 15. Re -adjust the lower position, respectively 1, 3, 4, 5, 6, and 7 petals, respectively.
Step 16, apply the separated two petals with glue to re -stick them together.
Step 17. This is a new shape that is re -sticking.
Step 18, then roll all the petals outward, as shown in the figure.
The step 19, apply 1 petal to the top of the flower branch to adjust the shape.
It Step 20, apply glue below the 1 petals on the flower branch, and put the two petals from the other end of the flower branch along the hole of the center. Stick up.
Step 21, then wear 3, 4, 5, and 6 petals to the top of the flower branch, stick well, and adjust slightly. In this way, the beautiful roses are folded, very beautiful, interested friends hurry up and try.
mart origami stacking roses 2 1. It is consistent with the folding method of all origami roses. Choose your favorite direction paper, and the color is also determined at the same time. However, since it is made of origami roses, it will be the best choice of red paper. First, the paper is folded horizontally and vertically. After the unfolding, two clatons that are criss -horizontal will be kept in the middle of the paper. Next, a back -ups are arbitrarily folded at will, so that the rectangular structure is obtained.
2. Then, on the basis of this rectangular structure, turn the edge of the square paper midline upwards. It needs to be adjusted. Then expand the origami model so that you can see another two creases again. Then rotate the paper 90 degrees, and then fold in the same way. After the expansion, two creases will also be left in the middle of the paper. In this way, the new four -two -two -two -two -two -two -two -two -two -two -two -.
3. The origami model at this time is folded twice in a consecutive way according to the horizontal and vertical folding method, and folded into a small square. That is the style as shown in the figure. Then turn the corner where the center point of the paper is turned upwards, and the folding point is at the intersection of the two nearest creases. The specific point and folding method can refer to the style shown in the origami icon to perform folding operations. After the folding is completed, the origami model is expanded, and you can see that the center of the paper is retained with a small square left after the folding.
4. In this step, it is mainly made of pre -campaign (the production of other origami roses is similar here, such as origami rose tutorial: simple handmade origami rose `folding method). That is, according to the method shown in the origami icon, the position of the yellow line is folded out of the pre -campaign. The remaining three positions in this one also folded out the pre -creases in the same way. After completing this fold, you can rotate the paper.
5. After the above steps are completed, we get the origami rose crease style as shown in the figure. Because of the assistance of pre -creases, the Kawasaki rose -type rotation aggregation can be carried out next.
Themugpant origami stack rose 3 1. Select a square paper, the color is naturally red. Here, the square paper is folded first, and the left corner and right corner of the right corner are shown as shown in the figure.
2. Then fold the top side to the diagonal crease, and the bottom edge is also folded at the diagonal crease, which is inclined to the top and the left top angle obliquely Turn down and fold the bottom edge and the right bottom to the diagonal above. After completing the folding, the origami model is flattened.
3. In fact, the folding production above has left us three creases, and more creases need to be made next. And folded as shown in the figure. The folding here is the same as the creases of Shinagawazaki roses. After using 7 creases, the origami model was directly divided into eight points. The above four were valley marks, the following three were valley marks, and the middle ones were peak marks. Just fold it out according to the drawing icon.
4. Put the previous folding paper, and then rotate the paper, that is, the same pair of diagonal and one pair is also folded in the same way as the first step to the third step. After the paper is launched, you will see the creases shown in the figure. These creases will finally assist us to complete the production of origami roses.
a
5. Pay attention to the red lines in the origami icon. These red lines are peak marks that we should fold out at this step, and these folds are all local folds, so Just be a little serious when you fold it.
6. Follow the four corners according to the blue lines in the origami icon at this time. Note that when the blue lines are located when folding, the position of the blue line is not completely fits all else, but at least it is at least a small square structure composed of a crease. This point must be Pay attention.
7. The red and blue lines here are to explain that the next folding is twisting and folding. On the lines, and a small square structure is formed in the middle.
8. After folding in front, we got the origami icons as shown in the figure. It can be seen that at this time, there are already some folding roses to appear, especially if you know a little about the folding of Kawasaki roses, you must not be unfamiliar with the appearance of such a structure.