1. Boil the head of the two ropes with a lighter, and turn the rope to the tip of the rope from the holes of the jade. 2. Separate two ropes, turn the rope on the right to the top, and bend to the left. Then the rope on the left pressed the rope on the right, walked around, and walked over from the hole bent over the right rope. Tighten 2 ropes. 3. Turn the rope on the left to the top, bend to the right, pull the rope on the right, go around, put it out from the hole made of the rope on the left, tighten 2 ropes. 4. Repeat the second step, turn the rope on the right to the top and bend to the left. Then the rope on the left pressed the rope on the right, walked around, and walked over from the hole bent over the right rope. Tighten 2 ropes. 5. After this step, it is basically fine. If it is not tight, you can repeat the third step. If you think it's okay, just look down. In the last step, cut the rope on both sides, there is a short section, don't cut too bald, then burn it with a lighter, and stick it there after melting. The tied rope will not rotate back and forth.
The following are 12 stakes, 2 lines each of each color, placed in a rice shape, the same method above, move to the bottom right to the bottom right, lower left, lower left Move to the upper left, then turn the board, change the three colors.
The heart -shaped climbing knot bracelet tutorial, beautiful seven -star bracelet China bracelets have always been loved by young friends, today I will continue to introduce a very beautiful Chinese knot bracelet Edit. This Chinese bracelet was made by Teacher Lanting.
The weaving process of the seven -star bead bracelet: 1, a temporary knot at the middle point of the 6 lines, the placement of the 6 lines is shown in Figure 1. 2. The outermost line is pulled in the middle, as axis, the other two winding. The middle axis is interconnected, and it becomes an inverted word. 3. Two rows. 4. Two lines in the middle to penetrate beads and 2 lines on each side. Each editor 5 snake knots. 5. Repeat steps 2.6, repeat step 3.
7, 3 knots. 8. Turn your head and unlock the temporary knot. 9. Wear beads in the middle and edited snake knots next to them. 10. Continue. 11. Make 7 beads on. 12. Two threads on the side, two dark lines cover 2 light -colored lines to compile a dual connection.
13, cross the two sets of lines, take one remaining line, and compile 3 pairs of flat knots. 14. Complete. The weaving tutorial for snake knots (other bracelet production tutorials, click the blue font link)
The red rope transfer bracelet n R n The production process of transfer knot 2 The transfer production
Transit knotting process 3: Repeatedly compiled it into the spiral flower of Figure 4
Process 4 It is weaving Chinese knots with this transfer knot. Step 1: Two of 1.5 meters with a rough jade line, one of 0.6 meters. Turn the 3 lines together
It Step 2: Do the transshipment below Step 3: After doing a paragraph, you can open the original deduction Step 4: Continue to transfer transfer to transfer to transfer. End, until the length reaches the wrist for one week Step 5: Take up the lines on both ends, and use a 20 -centimeter line to use 4 transshipment to make a mediation buckle
1. Boil the head of the two ropes with a lighter, and turn the rope to the tip of the rope from the holes of the jade.
2. Separate two ropes, turn the rope on the right to the top, and bend to the left. Then the rope on the left pressed the rope on the right, walked around, and walked over from the hole bent over the right rope. Tighten 2 ropes.
3. Turn the rope on the left to the top, bend to the right, pull the rope on the right, go around, put it out from the hole made of the rope on the left, tighten 2 ropes.
4. Repeat the second step, turn the rope on the right to the top and bend to the left. Then the rope on the left pressed the rope on the right, walked around, and walked over from the hole bent over the right rope. Tighten 2 ropes.
5. After this step, it is basically fine. If it is not tight, you can repeat the third step. If you think it's okay, just look down. In the last step, cut the rope on both sides, there is a short section, don't cut too bald, then burn it with a lighter, and stick it there after melting. The tied rope will not rotate back and forth.
Bracelet, rope compilation method (5)
|
browse: 18113
|
updates:
2013-04-02 13: 26
|
Tags: bracelet
The following are 12 stakes, 2 lines each of each color, placed in a rice shape, the same method above, move to the bottom right to the bottom right, lower left, lower left Move to the upper left, then turn the board, change the three colors.
The heart -shaped climbing knot bracelet tutorial, beautiful seven -star bracelet
China bracelets have always been loved by young friends, today I will continue to introduce a very beautiful Chinese knot bracelet Edit. This Chinese bracelet was made by Teacher Lanting.
The weaving process of the seven -star bead bracelet:
1, a temporary knot at the middle point of the 6 lines, the placement of the 6 lines is shown in Figure 1. 2. The outermost line is pulled in the middle, as axis, the other two winding. The middle axis is interconnected, and it becomes an inverted word. 3. Two rows. 4. Two lines in the middle to penetrate beads and 2 lines on each side. Each editor 5 snake knots. 5. Repeat steps 2.6, repeat step 3.
7, 3 knots. 8. Turn your head and unlock the temporary knot. 9. Wear beads in the middle and edited snake knots next to them. 10. Continue. 11. Make 7 beads on. 12. Two threads on the side, two dark lines cover 2 light -colored lines to compile a dual connection.
13, cross the two sets of lines, take one remaining line, and compile 3 pairs of flat knots. 14. Complete.
The weaving tutorial for snake knots (other bracelet production tutorials, click the blue font link)
The red rope transfer bracelet
n R n
The production process of transfer knot 2
The transfer production
Transit knotting process 3: Repeatedly compiled it into the spiral flower of Figure 4
Process 4
It is weaving Chinese knots with this transfer knot. Step 1: Two of 1.5 meters with a rough jade line, one of 0.6 meters. Turn the 3 lines together
It Step 2: Do the transshipment below
Step 3: After doing a paragraph, you can open the original deduction
Step 4: Continue to transfer transfer to transfer to transfer. End, until the length reaches the wrist for one week
Step 5: Take up the lines on both ends, and use a 20 -centimeter line to use 4 transshipment to make a mediation buckle
Do you want to make a hand edit