wholesale jewelry parts nyc How to make a dried flower

wholesale feather jewelry Book pressure drying method
1. This method has basically been tried in the textbooks as a child, and it is also a common method for making plant specimens. Commonly used tools include hard cardboard, thick books and magazines.
2, the more thinner the flowers, the smaller the better. This is more conducive to book pressure. Sitting between flowers and flowers.
3. If you are afraid of staining the book, you can first clamp a layer of paper towels and then press, or find some blank pages or unimportant pages to press. After 3-4 days, the flowers sandwiched in the book will become flat. There are many uses of flat flowers, which can be mounted with a frame to make murals. Or use the resin to combine it to carry out secondary creation.

velevet jewelry box wholesale You want to do this:
In a very clean and dry fine sand, find a printing paper for a carton that can be installed with flowers. Put the flowers with fine sand into the carton. Put it in a dry place. After two weeks, you can.
, but I think the production of dried flowers:
What are the commonly used flower materials for dry flowers:
(1) Block -shaped flower material: group blocks in dry flowers There are relatively few types of materials. The commonly used are: rose, wheat straw, small gourd, small loofah, sunflower, eight immortal flowers, blue thorn heads, etc. These flowers appear as the main flower in the works.
(2) Line -shaped flower material: Due to the characteristics of flower materials, dry flowers are the most abundant. Almost 80%of the flower materials can be used as linear flowers, such as laugcura, motherwort, reed flower flowers , Grand Miscantalina, Willow, Lover's Grass, Wheat, Sadone, etc., all have a good sense of lines.
(3) embellishment of filling flowers: such as full stars, lover grass, dried branches, toon fruits, forgotten self, thousands of red, star flowers, shell flowers, etc., all of which are excellent embellishment flowers Materials, the color can be continuously changed to make the work more colorful.
(4) Various leaf materials: commonly used leaves, fern, Guangrulan, Nantian bamboo, rhododendron, top ten contributions, Yangyang, Puwu, Hai Tong, etc., can not only have the original color, but also It can be processed into various tones according to the needs of the work.
How to collect dry flowers:
The dry flowers can be divided into two types according to the nature of use: one is a certain length requirements, as a dried flower for flower arrangement materials. The other is the dried flower of decorations and gifts without length requirements. Therefore, when collecting flowers, you can choose according to your use. As a dried flower material for flower arrangement, it is necessary to collect branches with a strong, beautiful, good -looking, good -looking, well -established plant. The leaves should choose good shape, large leaf, thick, hard -textured, rigid. Flower ears and ears should choose plump and not easy to fall off.
The flower materials for making artworks do not require length, but the shape is full and the fruit shell is moderate.
The materials suitable for dried flowers are artificially cultivated and wild. Collecting can be performed in various seasons. Of course, autumn is the best time to collect flowers.
It how to dry the flowers:
The plant collected by the collection should be dried immediately. The simplest and most commonly used method is the natural drying method.
Prinking drying method: suitable for flowers with a certain length and flowers. The specific method is to organize the collected flowers in a bundle, and use rubber bands (do not use a rope, because the plant will shrink after drying, the volume becomes smaller, it will fall off from the rope knot) tightly) Essence Rose, not forgotten, lover grass, thousands of days, wheat, full stars, etc. should be placed in the place where the light is avoided, while artemisia, toon fruit, sorghum, and shower heads can be hung in a place with sunlight.
This drying method: It is suitable for flowers with short stems and heavier flower ears, such as chrysanthemums, pine cones, small gourds, small loofah, corn, etc. Put the flower material loosely on the dry and ventilated and avoiding platform, flip it in time to speed up the volatilization of water and prevent mildew.
The leaf drying method: Leaves such as fern leaf, Guangrulan, Su Tie, bamboo leaves, etc., use the pressure drying method. Because the leaves will be rolled after drying, the original flat form and size cannot be maintained, so be sure to use heavy stone pressure flowers or specimens to flatten the drying method. In order to conduct later bleach.
How how to make the flower material bleach
The sorting out the dry flower materials, remove the unqualified manner, and pass the qualified into a unified specification of a beam of flower materials. Each bundle must have the specified quantity Essence
The treatment conditions: The bleaching treatment of dried flowers requires specific conditions. First of all, the preparation of the device, including the processing groove, rinse groove, electric dryer, etc.
So soaking the prepared flowers in the wet treatment slot equipped with water for 1 to 2 hours. If the flower material is dirty, you can add an appropriate amount of detergent to clean.
This decolorization and bleaching: The discoloration and bleaching of dried flowers are often done during the same operation. By bleaching is a heavy process in the processing and production of flowers. First, choose a certain chemical reagent, such as sodium sodium chloride and hydrogen peroxide. Washing after bleaching is important, removing the remaining drift liquid and debris. Make the bleaching flowers without drifting liquid and keep it clean. The temperature of this process must be strictly controlled and cannot be higher than 60 degrees Celsius, otherwise it will damage plant fibers.
How how to color the flower material
The dried flower material after bleaching must be treated with bleaching color. The color of the flower material has physical coloring, spraying and chemical dyeing.
The coloring and spraying of flowers refer to water -based pigments or oily materials attached to the surface of the plant, so that the plant has a certain color. This method makes the color of dry flowers unreal and soft, and the effect is not very good.
The color vacuum coating of flowers: In order to make the flower material better metal effect, the best way is to use real wide coating technology. After the coating flower material is soft and beautiful, it can also show the original characteristics of the plant. Not only can the metal luster be maintained for a long time, but the metal membrane covered on the surface of the plant is firmly attached to the flower material, and the washing will not fall off.
The dyeing of flowers: In the coloring method of dried flowers, the best and best effect is the use of chemical dyeing methods. The principle is that the dye molecules penetrate inside the plant and bind to the cells of the plant, so as to stably and uniformly spread in the inside and outside layers of the flower, so that the flower material has a soft and natural color and real sense. The dyeing of flowers generally uses water edge dyeing, that is, the dyeing process is completed in the dye solution. Common dyes have active dye direct dyes and alkaline dyes.
How to soften dry flowers
to make the dried flowers not dry, there is good flexibility, and it can be softened. After the dyeing can be washed, then immersed in the glycerin solution with a concentration of 30%, soaked for 30 minutes, and rinsed out. After drying, it feels flexible and does not feel very dry.
How to save the dried flowers
The flower material after dyeing and drying. Use rubber bands to be tightly tightened according to the variety, color, and length, put in plastic bags, and moisture -proof sunscreen. Pay special attention to the moisture -proof sun protection of wheat straw chrysanthemums.
How how to process the flower materials that do not need to bleach
Pets, Xiao Canglan, Phalaenopsis, Lada Plum Blossoms, etc. are special flowers that do not need to be bleached. One processing method.
(1) Desiccant embedding method: Using the water absorption characteristics of the desiccant to remove the moisture in the flower material, the commonly used desiccant is the color -changing silicone particles.
Preidal operation method: evenly sprinkle the grinded heated silicone particles in the dry container or plastic box. The spoon will sprinkle the prepared silicone particles between the petals of each flower, so that the particles of the desiccant are filled with the petals of each flower and bury it. After all are sprinkled, cover the lid, and seal the lid with tape to prevent the water in the air from entering the dryer. After 4 to 5 days, it can be used with a mule and can be used at any time. Pay attention to the moisture, sun protection, and dustproof flowers.
(2) Salt and sand granules buried method: If there is no desiccant, you can use the grinded salt particles or fine gauze instead of silicone treatment flowers. The salt and sand grains are heated in advance to remove the water contained in the inside. After cooling, use the embedded method described above.
(3) Microwave oven drying method: Prepare a microwave Shanghai with a turntable. The desiccant can use silicone particles or fine sand particles. Buried with a desiccant, no lid is added, put directly on the turntable of the microwave oven, and process it in the mid -range temperature.