There are two major points for jewelry design-techniques and tools, and the two are regardless of each other. In traditional realistic hand drawing, the tools for tools are very standard and strict.
. Pencil The principles of jewelry design must be drawn in the original size. Therefore, there are many fine places. It is best to use a hard, thin pencil. You can buy an automatic pencil of 0.3 or 0.35 in the professional stationery store. I am more commonly used these two. There is also a 0.2 automatic lead on a certain treasure, and it has not had time to try it. At the same time, prepare the supporting pens. . Bringing For the color of the pigment, you need to prepare a few brushes with different thickness. You can choose the brush material according to your personal preference. In addition, a good hook pen is also needed for the outline of the outer contour of the jewelry. three, needle pipe pen/hook pens Idded in the contour of the effect map . Color pencil Jewelry hand -drawn generally uses water -soluble color lead; water -soluble color lead; After painting, a small amount of water can be dipped in a small amount of water to stain it to achieve better painting effects. 5. Pigment A piglets and gouache pigments. Watercolor paint is thinner and thinner, and the color is lighter to draw sketches. The quality of the flour is thick and has strong coverage. It is suitable for the renderings of painting in our color card paper. 6. Rhalette Generally preparing two pieces, one piece of soft rubber, a piece of rubber. The rubber can be cut into small squares. The sharp edges and corners are easier to wipe off the small part. Plastic rubber (this rubber is very soft to pinch into various forms); for the treatment of mild traces on the screen. The rubber can be cut into a sharp angle to wipe off the details, and the pencil marks that should not be removed can be wiped off. Net, there is a rubber pen, like an automatic pencil, but the core is a rubber inside, which can be more finely rubbed. Seven, rolling pen knife , as the name suggests, but some swords are still very interesting. 8. Paper The hand -painted jewelry hand -drawn can be used for ordinary sketch paper, gouache paper, etc., but now people's most commonly used hand -painted renderings are used in paper or cardboard. The three colors of white, gray, and black are the most commonly used. However, black cardboard is more colorful. When using black cardboard, you must pay attention to the color of jewelry. Some white cards with high transparency and lighter colors are not recommended, because white cards have conflicts with gems and gold refraction highlights. The gray card is the most suitable paper for drawing renderings. , eight, sulfuric acid paper The sulfuric acid paper is a harder paper with a hard texture, which can be used to copy images and drawing. . The gemstone regulations This is the unique regulations of jewelry design, which is used to draw some commonly used gem strips and common geometric shapes. Jewelry designer essential. This, cloud ruler is large and small, used to draw a smooth curve. There are ordinary triangular boards and straight ruler, pay attention to buy transparent. eleven, elimination board The small iron sheet with various shapes on it. Used to wipe off a piece of detail in the picture. The hollow part can be wiped out of the position that needs to be cleared to ensure the integrity of the other parts. This, feather brush It to sweep off rubber dandruff without hurting the picture. Novices also look at the public account jewelry design hand -painted electronic painting (extension: jewelry electronic painting generally uses software such as JCAD and rhinos) The above is the introduction of jewelry hand -painted design tools. r n
Jewelry design hand -drawn generally use triangle, angle instruments, etc., now jewelry design generally uses computer tools such as CDR software.
There are two major points for jewelry design-techniques and tools, and the two are regardless of each other. In traditional realistic hand drawing, the tools for tools are very standard and strict.
. Pencil
The principles of jewelry design must be drawn in the original size. Therefore, there are many fine places. It is best to use a hard, thin pencil. You can buy an automatic pencil of 0.3 or 0.35 in the professional stationery store. I am more commonly used these two. There is also a 0.2 automatic lead on a certain treasure, and it has not had time to try it. At the same time, prepare the supporting pens.
. Bringing
For the color of the pigment, you need to prepare a few brushes with different thickness. You can choose the brush material according to your personal preference. In addition, a good hook pen is also needed for the outline of the outer contour of the jewelry.
three, needle pipe pen/hook pens
Idded in the contour of the effect map
. Color pencil
Jewelry hand -drawn generally uses water -soluble color lead; water -soluble color lead; After painting, a small amount of water can be dipped in a small amount of water to stain it to achieve better painting effects.
5. Pigment
A piglets and gouache pigments. Watercolor paint is thinner and thinner, and the color is lighter to draw sketches. The quality of the flour is thick and has strong coverage. It is suitable for the renderings of painting in our color card paper.
6. Rhalette
Generally preparing two pieces, one piece of soft rubber, a piece of rubber. The rubber can be cut into small squares. The sharp edges and corners are easier to wipe off the small part. Plastic rubber (this rubber is very soft to pinch into various forms); for the treatment of mild traces on the screen. The rubber can be cut into a sharp angle to wipe off the details, and the pencil marks that should not be removed can be wiped off.
Net, there is a rubber pen, like an automatic pencil, but the core is a rubber inside, which can be more finely rubbed.
Seven, rolling pen knife
, as the name suggests, but some swords are still very interesting.
8. Paper
The hand -painted jewelry hand -drawn can be used for ordinary sketch paper, gouache paper, etc., but now people's most commonly used hand -painted renderings are used in paper or cardboard. The three colors of white, gray, and black are the most commonly used. However, black cardboard is more colorful. When using black cardboard, you must pay attention to the color of jewelry. Some white cards with high transparency and lighter colors are not recommended, because white cards have conflicts with gems and gold refraction highlights. The gray card is the most suitable paper for drawing renderings.
, eight, sulfuric acid paper
The sulfuric acid paper is a harder paper with a hard texture, which can be used to copy images and drawing.
. The gemstone regulations
This is the unique regulations of jewelry design, which is used to draw some commonly used gem strips and common geometric shapes. Jewelry designer essential.
This, cloud ruler
is large and small, used to draw a smooth curve. There are ordinary triangular boards and straight ruler, pay attention to buy transparent.
eleven, elimination board
The small iron sheet with various shapes on it. Used to wipe off a piece of detail in the picture. The hollow part can be wiped out of the position that needs to be cleared to ensure the integrity of the other parts.
This, feather brush
It to sweep off rubber dandruff without hurting the picture. Novices also look at the public account jewelry design hand -painted electronic painting (extension: jewelry electronic painting generally uses software such as JCAD and rhinos)
The above is the introduction of jewelry hand -painted design tools. r n